Ford Mustang (1999-2004) Service Manual: Manual Transmission
The T5OD 5-speed transmission:
- fifth speed gear functions as an overdrive gear.
- forward gears are synchronized and helical cut.
- shift interlock system prevents the engagement of more than one gear.
Transmission, Manual Five-Speed
Transmission Identification
The transmission identification tag is located under the lower left bolt that retains the extension housing (7A039) to the case (7005).
Transmission Identification Tag
Manual Transaxle/Transmission - T5OD
General Specifications
Torque Specifications
...
Other materials:
Camshaft End Play - Push Rod Engines
Special Tool(s)
Dial Indicator Gauge with
Holding Fixture
100-002 (TOOL-4201-C) or
equivalent
1. Remove the valve tappets. Refer to the appropriate section in Group 303
for the procedure.
2. Use a Dial Indicator Gauge with Holding Fixture ...
Driveline System - General Information
Driveline Angles @ Curb Specifications
All driveshaft and pinion angles point downward.
General Specifications
a: Service refill capacities are determined by filling the axle 6.3 mm (0.25
in [1/4 in]) to 14.3 mm (0.57 in
[5/16 in]) below the bottom of the ...
Installation
1. NOTE: This procedure applies to both the LH and RH halfshafts.
Install a new driveshaft bearing retainer circlip.
2. Remove the special tool.
3. CAUTION: Differential seal damage will occur if installing the
halfshaft without the
special tool installed. ...
