Ford Mustang (2005-2014) Owners Manual: MyKey
- Principles of operation
- Creating a MyKey
- Clearing all MyKeys
- Checking MyKey system status
- Using MyKey with remote start systems
- MyKey troubleshooting
Replacing a lost key or remote control
You can purchase replacement or additional keys or remote controls from
an authorized dealer. A dealer can program the transmitters to your
vehicle or you may be able to program them yourself. See the ...
Principles of operation
MyKey allows you to program keys with restricted driving modes to
promote good driving habits. You can use all but one of the keys
programmed to your vehicle with these restricted modes.
Any keys tha ...
Other materials:
Wheel Hub or Axle Flange Face Runout
NOTE: If the axle shaft assembly is removed, check runout of the shaft
itself. The forged (unmachined)
part of the shaft is allowed to have as much as 3.0 mm (0.120 inch) runout. This
alone will not cause a
vibration condition.
1. Position the special tool ...
Cylinder Head Temperature (CHT) Sensor - 3.8L
Removal
1. Disconnect the battery ground cable. For additional information
refer to Section.
2. Disconnect the cylinder head temperature sensor connector.
3. Remove the CHT sensor.
Installation
1. To install, reverse the removal procedure. ...
Support Straps
Removal
WARNING: Do not smoke, carry lighted tobacco or an open flame of any
type when
working on or near any fuel-related components. Highly flammable mixtures are
always present
and may be ignited, possibly resulting in personal injury.
WARNING: Fuel suppl ...
