Ford Mustang (1999-2004) Service Manual: Canister Vent Solenoid Closing Procedure

Ford Mustang (1999-2004) Service Manual / Engine / Evaporative Emissions / Canister Vent Solenoid Closing Procedure

Special Tool(s)

Worldwide Diagnostic System (WDS) 418-F224, New Generation STAR (NGS) Tester 418-F052, or equivalent scan tool

CAUTION: The canister vent solenoid must not be energized for more than nine minutes at one time. Once the canister vent solenoid is energized and de-energized, adequate time must be allowed for the component to cool adequately. Failure to allow the component to cool may create a false failure in the diagnostics, causing unnecessary repairs.

1. Connect the scan tool and select the output test mode.

2. If PID monitors are not active, select PIDs.

3. Select the fuel tank pressure (FTP) and the volts (V) parameter identification (PID) for monitoring.

4. Select the ALL OFF mode.

5. Close the canister vent solenoid by pushing the START button on the scan tool.

    Pinpoint Tests
    NOTE: Reinstall or install new evaporative emission hose clamps removed or damaged during testing procedures. PINPOINT TEST A: DTC P0442 SMALL LEAK IN EVAP SYSTEM Test Step Result / Action to ...

    Evaporative Emission System Leak Test
    Special Tool(s) Evaporative Emission System Tester 310-F007 (134-00056) or equivalent Worldwide Diagnostic System (WDS) 418-F224, New Generation STAR (NGS) Tester ...

    Other materials:

    Tire Wear Chart
    Wheel and tire NVH concerns are directly related to vehicle speed and are not generally affected by acceleration, coasting or decelerating. Also, out-of-balance wheel and tires can vibrate at more than one speed. A vibration that is affected by the engine ...

    Brake Caliper - Cobra
    Removal 1. Raise and support the vehicle. 2. Remove the tire and wheel assembly. 3. Remove the caliper locating pin E-clip. 4. Remove the caliper locating pin. 5. Remove the front brake flow bolt. 6. Remove the caliper. 7. Remove the brake pa ...

    Using the boot
    Installing the Boot WARNING: Always secure the retaining clips and boot straps on the vehicle or the boot may come loose while driving. Note: Be sure the boot is secure on the vehicle before driving. Improper installation can result in loss or damage of the b ...