Ford Mustang (1999-2004) Service Manual: Crankshaft Front Seal
Special Tool(s)
Installer, Front Cover Oil Seal 303-335 (T88T-6701-A) | |
Installer, Crankshaft Front Oil Seal 303-474 (T94P-6701-AH) | |
Remover, Oil Seal 303-409 (T92C-6700-CH) |
Material
Removal
1. Remove the crankshaft pulley. For additional information, refer to Crankshaft Pulley in this section.
2. Using the special tool, remove and discard the crankshaft front seal.
Installation
1. NOTE: Lubricate the crankshaft front seal with clean engine oil before assembly.
Using the special tool, install the crankshaft front seal.
2. Install the crankshaft pulley. For additional information, refer to Crankshaft Pulley in this section.
Crankshaft Pulley
Special Tool(s) Remover, Crankshaft Vibration Damper 303-009 (T58P-6316-D) Remover, Crankshaft Vibration Damper 303-176 (T82L-6316-B) Installer, Crankshaft Damper/C ...Engine Front Cover
Material ...Other materials:
Installation
1. Align the blend door driver to the full heat position.
2. Place the temperature control knob in the full WARM position.
3. Attach the cable drive to the control head.
4. Rotate the knob back and forth from full WARM to full COOL.
5. Check the cable ...
Engine (Disassembly)
Special Tool(s)
Impact Slide Hammer
100-001 (T50T-100-A)
Remover, Crankshaft Vibration
Damper
303-009 (T58P-6316-D)
Holding Tool, Crankshaft
303-448 (T93P-6303-A)
Guides, Connecting Rod
303-442 (T93P- ...
Brake Booster - Vacuum (Description and Operation)
Power Brake Booster
The vacuum type power brake booster (2005):
is a dual diaphragm, vacuum assisted power brake booster
reduces brake pedal force and travel distance.
is located on the LH side of the bulkhead in the engine compartment,
be ...