Ford Mustang (1999-2004) Service Manual: Electronic Feature Group
- Anti-Theft - PATS
- Anti-Theft - Passive Anti-Theft System (PATS) (Description and Operation)
- Anti-Theft - Passive Anti-Theft System (PATS) (Diagnosis and Testing)
- Key Programming - Erase All Key Codes and Program Two Keys
- Key Programming - Program a Key Using Two Programmed Keys
- Key Programming - Enable/Disable Spare Key Programming
- Key Programming - Additional Key With One Programmed Key
- Security Access - Procedure
- Module - Passive Anti-Theft Transceiver
- Multifunction Electronic Control Modules
Module Configuration
Module Configuration (Diagnosis and Testing)
Special Tool(s)
Worldwide Diagnostic System
(WDS)
418-F224
New Generation STAR (NGS)
Tester
418-F052 or equivalent
diagnostic tool ...
Anti-Theft - PATS
Torque Specifications
...
Other materials:
Rear Drive Axle/Differential - Ford 8.8-Inch IRS
General Specifications
Torque Specifications
a: Use Stud and Bearing Mount EOAZ-19554-BA or equivalent meeting Ford
specification WSKM2G349-
A1.
b: With pinion flange yoke seal. ...
Handle - Exterior Door
Removal
1. Remove the door trim panel (23942). For additional information,
refer to Section.
2. Release the exterior door handle actuating rod by opening the clip.
3. Remove the exterior door handle nuts.
4. Remove the exterior door handle.
Ins ...
Pinpoint Test P: No Communication With The Restraints Control Module
Normal Operation
The RCM communicates with the scan tool using ISO 9141 communication mode
through the data link
connector (DLC).
Possible Causes
A no communication condition can be caused by:
damage to circuit 70 (LB/WH).
a damaged DLC.
a damage ...
