Ford Mustang (1999-2004) Service Manual: Hydraulic Lash Adjuster
Removal and Installation
1. Remove the roller followers. For additional information, refer to Camshaft Roller Follower in this section.
2. Remove the eight hydraulic lash adjusters.
3. Inspect the lash adjusters. For additional information, refer to Section.
4. To install, reverse the removal procedure.
Valve Seals
Special Tool(s)
Valve Spring Compressor
303-452 (T93P-6565-AR)
Valve Stem Seal Replacer
303-383 (T91P-6571-A)
Compressor, Valve Spring
(Exhaust)
303-567 (T97 ...
Camshaft Roller Follower
Special Tool(s)
Compressor, Valve Spring
(Intake)
303-452 (T93P-6565-AR)
Compressor, Valve Spring
(Exhaust)
303-567 (T97P-6565-AH)
Removal
1. Remove the valve cover. ...
Other materials:
Installation
1. CAUTION: Make sure the hardened washer is installed between the
lower
suspension arm and bushing and the shock absorber. Failure to do so can result
in
damage and failure of the lower suspension arm and bushing.
NOTE: The toe link bolt and nuts are of a ...
Removal
1. Disconnect the battery ground cable. For additional information, refer to
Section.
2. Remove the transmission.
3. Remove the air intake scoop. For additional information, refer to Section.
4. Remove the air cleaner outlet tube. For additional informatio ...
Removal
1. Disconnect the battery ground cable (14301).
2. Remove the air cleaner outlet tube (9B659).
3. Remove the radiator sight shield (8C291).
4. Remove the coolant recovery reservoir (8A080).
1. Disconnect the hose.
2. Remove the bolts.
3. Remo ...
