Ford Mustang (1999-2004) Service Manual: Removal
1. Disconnect the battery ground cable (14301).
2. Remove the air cleaner outlet tube (9B659).
3. Remove the radiator sight shield (8C291).
4. Remove the coolant recovery reservoir (8A080).
1. Disconnect the hose.
2. Remove the bolts.
3. Remove the coolant recovery reservoir.
5. Install the special tool.
6. Install the special tool.
7. Install the special tool.
8. Raise the vehicle on a hoist.
9. Remove the LH engine mount nut.
10. Remove the RH engine mount nut.
11. Lower the vehicle.
12. Raise the engine.
13. Raise the vehicle on a hoist.
14. Position the bracket aside.
- Remove the nut.
15. Disconnect the engine ground strap.
- Remove the nut.
16. Remove the LH engine insulator (6038).
- Remove the bolts.
17. Remove the RH engine insulator.
- Remove the bolts.
- Remove the nuts.
Engine Support Insulators
Special Tool(s)
3 Bar Engine Support Kit
303-F072
Engine Lift Bracket Set
303-D095 (D94L-6001-A) or
equivalent
...
Installation
1. Install the RH engine insulator.
Install the nuts.
Install the bolts.
2. Install the LH engine insulator.
3. Connect the engine ground strap.
4. Install the bracket.
5. Lower the ve ...
Other materials:
Front Subframe - 3.8L Engine
Special Tool(s)
3-Bar Engine Support Kit
303-F072
Lifting Bracket Set, Engine
303-D095 (D94L-6001-A) (014-
00792)
Removal and Installation
All vehicles
1. Remove the steering gear. For additional information, refer to Section.
...
Gearshift Rail Bushing
Special Tool(s)
Universal Puller Set
303-DS005 (D80L-100-A) or
equivalent
Installer, Shift Rail Bushing
308-244 (T96P-7025-F)
Slide Hammer
100-001 (T50T-100-A)
Disassembly and Assembly
1. Using the special tools, r ...
Engine - Mach I 4.6L (4V)
General Specifications
Engine Specifications
a - Newly Installed-Refers to the condition of the "NEW" drive belt
before the engine has made no more
than one rotation and before the belt has had a chance to stretch or seat
into the pu ...
