Ford Mustang (1999-2004) Service Manual: Warning Indicator Bulb
Removal and Installation
1. Remove the instrument cluster. Refer to Instrument Cluster in this section.
2. Remove the necessary instrument cluster bulbs by rotating one quarter turn counterclockwise.
3. To install, reverse the removal procedure.
Instrument Cluster Lens
Removal and Installation
1. Remove the instrument cluster. Refer to Instrument Cluster in this section.
2. Remove the screws and remove the instrument cluster lens.
3. To install, reverse the removal procedure.
Instrument Cluster (Removal and Installation)
Removal and Installation All vehicles 1. CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result. Disconnect the battery ground cabl ...Horn
Torque Specifications Horn The horn system consists of the following: dual horns (one high-pitched, one low-pitched) horn switch (located underneath the driver side air bag module [043 ...Other materials:
Disassembly
Main Control Valve Body - Disassembled View
1. Remove the torque converter clutch (TCC) solenoid and the shift solenoid.
1. Remove the bolt.
2. Remove the shift solenoid.
3. Remove the TCC solenoid.
2. Remove the two reinforcement plate ...
Jacking
WARNING: Never run the engine with one wheel off the ground, such as
when changing a
tire. The wheel still on the ground could cause the vehicle to move.
CAUTION: The jack (17080) provided with the vehicle is intended to be
used in an
emergency for changing ...
Wheel Hub and Bearing
Removal
CAUTION: Suspension fasteners are critical parts because they affect
performance of vital
components and systems and their failure can result in major service expense. A
new part with
the same part number or an equivalent part must be installed, if i ...