Ford Mustang (1999-2004) Service Manual: Spring - Coil

Installation

1. CAUTION: Make sure the hardened washer is installed between the lower suspension arm and bushing and the shock absorber. Failure to do so can result in damage and failure of the lower suspension ...

Removal

CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in major service expense. A new part with the same part ...

Other materials:

Accelerator Cable - 3.8L
Removal and Installation 1. Push the accelerator cable nylon bushing out of the accelerator pedal and shaft arm. 2. Remove the bolts retaining the accelerator cable to the dash panel. 3. Disconnect the accelerator cable from the throttle body by rotating ...

Cable and Bracket
Removal 1. Raise the vehicle on a hoist. For additional information, refer to Section. 2. Remove the cable shift from the shifter lever and bracket and discard the clip. 3. Remove the bolt from the cable. 4. Remove the bolt from the cable. 5. ...

Assembly
1. NOTE: Lubricate direct clutch piston inner seal and seal protector with petroleum jelly. Using the special tool, install the inner piston seal. Install the seal with sealing lip facing down. 2. Install the clutch piston outer seal so that when the pis ...