Ford Mustang (1999-2004) Service Manual: Air Cleaner Element - 3.8L
Removal and Installation
1. Remove the air cleaner outlet tube. For additional information, refer to Air Cleaner Outlet Pipe- 3.8L in this section
2. Disconnect the connector.
3. Remove the mass air flow (MAF) sensor.
1. Release the clips.
2. Remove the MAF sensor assembly.
4. Remove the air cleaner element.
5. To install, reverse the removal procedure.
Air Cleaner - 4.6L (2V) and 4.6L (4V)
Removal and Installation Mach I 1. Disconnect the air intake scoop outlet tube. All vehicles 2. Remove the air cleaner outlet tube from the throttle body. For additional information, refer to Ai ...Air Cleaner Element - 4.6L (2V)
Removal and Installation 1. Remove the air cleaner outlet tube (9B659). For additional information, refer to Air Cleaner Outlet Pipe-4.6L (2V) in this section. 2. Remove the mass air flow (MAF) ...Other materials:
Removal
1. Remove the A/C compressor (19703). For additional information, refer to
Air Conditioning (A/C)
Compressor-3.8L or Air Conditioning (A/C) Compressor-4.6L in this section.
2. Remove the bolt.
1. Hold the A/C disc and hub assembly (19D786) with the special ...
Pinpoint Tests - OSC Equipped Vehicles
Special Tool(s)
Breakout Box, EEC-V Control
System
418-049 (T94L-50-EEC-V) or
equivalent
MLP-TR Cable
418-F107 (007-00111) or
equivalent
Worldwide Diagnostic System
(WDS)
418-F224
New Generation STAR (NGS)
T ...
Headlamp exit delay
You can set the delay time to keep the headlamps on for up to three
minutes after the ignition is turned off.
Follow the steps below to change the delay time (Steps 1 through 6
must be done within 10 seconds):
1. Turn the ignition off.
2. Turn the lighting co ...