Ford Mustang (1999-2004) Service Manual: Air Cleaner Element - 4.6L (2V)
Removal and Installation
1. Remove the air cleaner outlet tube (9B659). For additional information, refer to Air Cleaner Outlet Pipe-4.6L (2V) in this section.
2. Remove the mass air flow (MAF) assembly.
1. Release the clip.
2. Remove the MAF sensor assembly and position aside.
3. Remove the air cleaner element.
4. To install, reverse the removal procedure.
Air Cleaner Element -4.6L (4V)
Removal and Installation
1. Open the air cleaner housing.
2. Remove the element.
3. To install, reverse the removal procedure.
Air Cleaner Element - 3.8L
Removal and Installation
1. Remove the air cleaner outlet tube. For additional information, refer
to Air Cleaner Outlet Pipe-
3.8L in this section
2. Disconnect the connector.
3. Remove the ma ...
Air Intake Scoop
Removal and Installation
1. Disconnect the air intake scoop outlet from the air cleaner.
2. Disconnect the air intake scoop water drain hoses.
3. Remove the air intake scoop from the air intake s ...
Other materials:
Removal
1. Remove the differential assembly from the differential housing. For
additional information, refer
to Differential Case in this section.
2. CAUTION: Record the torque necessary to maintain rotation of the drive
pinion gear
through several revolutions prio ...
Window Glass - Door
Removal
1. Remove the door trim panel. For additional information, refer to
Section.
2. Remove the interior weatherstrip.
3. Remove the bolts and the stabilizers.
4. Remove the bolts and the upstop brackets.
5. Remove the rivet and the exterior w ...
Exhaust System (Description and Operation)
WARNING: The normal operating temperature of the exhaust system is very
high. Never
attempt to repair any part of the system until it has cooled. Be especially
careful when working
around the three way catalytic converter. The temperature of the three way
c ...
