Ford Mustang (1999-2004) Service Manual: Differential Case and Ring Gear
Special Tool(s)
2-Jaw Puller 205-D072 (D97L-4221-A) or equivalent | |
Installer, Differential Side Bearing 205-009 (T57L-4221-A1) | |
Step Plate 205-D016 (D80L-630-5) or equivalent |
Axle Assembly
Removal and Installation 1. CAUTION: The vehicle must be on level ground and at curb height. Mark the rear shock absorbers relative to their protective sleeve. During installation, raise the suspen ...Disassembly
1. Remove the differential assembly from the differential housing. For additional information, refer to Differential Case in this section. 2. Remove the bolts. 3. CAUTION: Do not damage the thread ...Other materials:
Engine (Removal)
Special Tool(s)
Lifting Bracket Set, Engine
303-D095 (D94L-6001-A) or
equivalent
Spreader Bar
303-D089 (D93P-6001-A3) or
equivalent
Heavy Duty Floor Crane
014-00071 or equivalent
Removal
WARNING: Do not smoke or ...
Air Bag Disposal - Driver, Undeployed, Scrapped
Vehicle
Remote Deployment
WARNING: Always wear safety glasses when repairing an air bag
supplemental restraint
system (SRS) vehicle and when handling an air bag module or safety belt
retractor/pretensioner assembly. This will reduce the risk of injury in
t ...
Pinpoint Test K: LFC 35/DTC B1935 - Passenger Air Bag Circuit Resistance
Low
Normal Operation
The restraints control module (RCM) monitors the resistance of the
passenger air bag ignitor by
measuring the resistance between pins 6 and 7. If the RCM detects low
resistance between these
pins, it will store a diagnostic trouble code ...