Ford Mustang (1999-2004) Service Manual: Disassembly
1. Remove the differential assembly from the differential housing. For additional information, refer to Differential Case in this section.
2. Remove the bolts.
3. CAUTION: Do not damage the threads in the bolt holes.
Insert a punch in the bolt holes and drive off the ring gear.
4. Using the special tools, remove the differential bearings (4221), if necessary.
5. Remove the bolt.
6. Remove the differential pinion shaft (4211).
7. Rotate and remove the differential pinion gears (4215) and differential pinion thrust washers (4230).
8. Remove the differential side gears (4236) and the differential side gear thrust washers (4228).
Differential Case and Ring Gear
Special Tool(s) 2-Jaw Puller 205-D072 (D97L-4221-A) or equivalent Installer, Differential Side Bearing 205-009 (T57L-4221-A1) Step Plate 205-D016 (D80L-630-5) or ...Assembly
1. Lubricate the differential side gear thrust washers and the differential side gear journals, and assemble the washers to the gears. Use SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL or equi ...Other materials:
Air Intake Scoop Bracket
Removal and Installation
1. Remove the air intake scoop. For additional information, refer to Air
Intake Scoop in this section.
2. Remove the air intake scoop bracket nut at the throttle body.
3. Remove the exhaust gas recirculation (EGR) vacuum regulat ...
Disassembly
1. Remove the differential assembly from the differential housing. For
additional information, refer
to Differential Case in this section.
2. Remove the 10 bolts.
3. CAUTION: Do not damage the threads in the bolt holes.
Insert a punch in the bolt holes, a ...
Disassembly
NOTE: The steering gear is serviceable as either a long or short rack
assembly. This procedure covers
the removal and installation of the components not supplied with a short rack
assembly. On short rack
assembly only the front wheel spindle tie-rods and fro ...