Ford Mustang (1999-2004) Service Manual: Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid
Mach I vehicles
1. Remove the air intake scoop. For additional information, refer to Section .
All vehicles
2. Remove the exhaust gas recirculation (EGR) vacuum regulator solenoid.
- Disconnect the electrical connector.
- Remove the bolts.
3. To install, reverse the removal procedure.
Differential Pressure Feedback Exhaust Gas Recirculation (EGR) System
Removal and Installation 1. NOTE: The 4.6L (2V) is shown. The 4.6L (4V) and 3.8L are similar. NOTE: Bolts may be used in place of nuts on some applications. Remove the differential pressure fee ...Positive Crankcase Ventilation (PCV) Hose
Removal and Installation 1. Disconnect the hose on the PCV valve. 2. Twist and remove the PCV valve. 3. To install, reverse the removal procedure. ...Other materials:
Latch - Front Seat Backrest
Removal
NOTE: The power seat backrest adjuster assembly must be installed as a
new unit. Repair of the
power seat backrest adjuster assembly components is not acceptable and
should not be attempted.
1. Remove the two screws and the seat backrest latch ...
Transmission Fluid Cooler
CAUTION: Whenever a transmission has been disassembled to install
new parts, the
cooler bypass valve (CBV), all transmission fluid coolers (in tank and
auxiliary) and
transmission fluid cooler lines must be cleaned and backflushed. Use a
suitable the t ...
Inspection and Verification
NOTE: A new instrument cluster must be reconfigured.
NOTE: The instrument panel dimmer switch is a part of the headlamp
switch.
1. Verify the customer concern.
2. Visually inspect for obvious signs of electrical damage.
Visual Inspection Chart
Electric ...