Ford Mustang (1999-2004) Service Manual: Toe Adjustment - Rear
1. Loosen the nuts.
- To prevent damage to the ball joints, hold the tie-rod ends while loosening the nuts.
2. Rotate the toe link to the correct toe setting.
3. Tighten the nuts.
- To prevent damage to the ball joints, hold the tie-rod ends while tightening the nuts.
4. Recheck the toe settings. Follow the manufacturer's instructions.
Toe Adjustment - Front
1. Start the engine and center the steering wheel. 2. Turn the engine off, and hold the steering wheel in the straight forward position by attaching a rigid link from the steering wheel to the seat ...Front Suspension
Torque Specifications ...Other materials:
Dual-Function Pressure Switch (4.6L)
The dual-function pressure switch is used to interrupt A/C compressor
operation in the event of high system discharge pressures.
The dual-function pressure switch is mounted on a Schrader valve-type
fitting on the high
pressure side of the A/C manifold ...
Installation
CAUTION: Electronic modules are sensitive to static electrical
charges. If exposed to
these charges, damage may result.
1. NOTE: Two technicians are necessary to carry out this step.
Install the instrument panel.
2. Install the upper instrument pa ...
Cleaning the exterior
Wash your vehicle regularly with cool or lukewarm water and a neutral
pH shampoo, such as Motorcraft® Detail Wash.
• Do not use a commercial or high-pressure wand on the surface or
edge of stripes and graphics. This can cause damage to the film and
cause th ...