Ford Mustang (1999-2004) Service Manual: Front Suspension
Torque Specifications
- Wheel Studs
- Wheel Hub and Bearing
- Arm - Lower
- Bar - Stabilizer
- Link - Stabilizer Bar
- Bushing - Stabilizer Bar
- Spindle
- Shock Absorber
- Spring
Toe Adjustment - Rear
1. Loosen the nuts. To prevent damage to the ball joints, hold the tie-rod ends while loosening the nuts. 2. Rotate the toe link to the correct toe setting. 3. Tighten the nuts. To ...Wheel Studs
Removal 1. Remove the wheel hub (1104). For additional information, refer to Wheel Hub and Bearing in this section. 2. Using a press, remove the wheel stud (1107) from the wheel hub. Installation 1 ...Other materials:
Manual Control Lever Shaft and Seal
Special Tool(s)
Installer, Shift Shaft Fluid Seal
307-050 (T74P-77498-A)
Alignment Gauge, TR Sensor
307-351 (T97L-70010-A)
Removal
1. Drain the transmission fluid and remove the fluid pan and filter. For
additional information, ...
Pinpoint Tests
CAUTION: Be careful when probing the CJB, battery junction box (BJB)
or any
connectors. Damage will result to the connector receptacle if the probe or
terminal being used
is too large.
CAUTION: Electronic modules are sensitive to static electrical char ...
Washer Pump
Removal
1. Remove the LF wheel and tire. Refer to Section.
2. Position the front portion of the LF inner splash shield aside.
3. WARNING: Windshield washer solution contains methanol, which is
poisonous.
Observe all cautions and warnings indicate ...