Ford Mustang (1999-2004) Service Manual: Anti-Lock Control - Traction Control
Torque Specifications
Anti-Lock Control -Traction Control
The four wheel anti-lock brake system (4WABS) with traction control consists of the following components:
- anti-lock brake control module (2C346)
- front anti-lock brake sensor (2C204)/(2C205)
- front anti-lock brake sensor indicator (2C182)
- hydraulic control unit (2C286)
- powertrain control module (12A650)
- rear anti-lock brake sensor (2C190)/(2C216)
- rear anti-lock brake sensor indicator (2C189)
- traction control switch
- yellow anti-lock brake system (ABS) warning indicator
Anti-Lock Control - Traction Control (Diagnosis and Testing)
Refer to Wiring Diagrams Cell 42, Anti-Lock Brake System for schematic and
connector information.
Special Tool(s)
Worldwide Diagnostic System
(WDS)
418-F224,
New Generation STAR (NGS)
...
Other materials:
Running out of fuel
Avoid running out of fuel because this situation may have an adverse
effect on powertrain components.
If you have run out of fuel:
• You may need to cycle the ignition from off to on several times after
refueling to allow the fuel system to pump the fuel fr ...
Dual-Function Pressure Switch (4.6L)
The dual-function pressure switch is used to interrupt A/C compressor
operation in the event of high system discharge pressures.
The dual-function pressure switch is mounted on a Schrader valve-type
fitting on the high
pressure side of the A/C manifold ...
Electronic Pressure Control (EPC) Solenoid
Special Tool(s)
Gauge, Transmission Solenoid
Connectors
307-426
Removal
1. Remove the manual control lever. For additional information, refer to
Manual Control Lever
Shaft and Seal in this section.
2. CAUTION: Do not pull on the molded ...
