Ford Mustang (1999-2004) Service Manual: Convertible Top (Description and Operation)

Convertible Top (Description and Operation)

 

Convertible Top (Description and Operation)

Rear Window Glass Assembly

The convertible top assembly is equipped with a rear window glass assembly. The rear window glass assembly is permanently attached to the folding top rear window curtain and cannot be opened. The rear window glass must be repaired separately.

Stay Pad

The stay pad is attached to the bows and is repaired as a component.

Hydraulic System

The convertible top hydraulic system is comprised of the lift cylinders, the motor, the connecting hydraulic lines and a convertible top switch. The hydraulic system, except for the convertible top switch, is removed as an assembly, but the components may be repaired separately.

    Convertible Top
    General Specifications Torque Specifications ...

    Convertible Top (Diagnosis and Testing)
    Refer to Wiring Diagrams Cell 103 , for schematic and connector information. Special Tool(s) 73 III Automotive Meter 105-R0057 or equivalent Principles of Operation The converti ...

    Other materials:

    Exhaust Manifold to Exhaust Gas Recirculation (EGR) Valve Tube
    Removal and Installation NOTE: 3.8L shown, 4.6L (2V) similar. 1. With the vehicle in NEUTRAL, position it on a hoist. 2. Disconnect the exhaust gas recirculation (EGR) valve tube from the exhaust manifold. 3. Remove the differential feedback exhaust ga ...

    Inspection and Verification
    WARNING: A vehicle equipped with a Traction-Lok differential will always have both wheels driving. If, while the vehicle is being serviced, only one wheel is raised off the ground and the rear axle is driven by the engine, the wheel on the ground could drive ...

    Exhaust Gas Recirculation (EGR) Valve
    Removal and Installation NOTE: The 4.6L, 2V is shown. The 3.8L is similar. 1. Disconnect the vacuum hose. 2. Disconnect the EGR tube from the EGR valve. 3. Remove the two bolts, the EGR valve and the gasket. 4. NOTE: Install a new gasket. To install, ...