Ford Mustang (1999-2004) Service Manual: Fuel Charging and Controls - Cobra 4.6L (4V)
General Specifications
Torque Specifications
Installation
1. NOTE: The LH side is shown, and the RH is similar. Install the supply manifold and tighten the four bolts. 2. Connect the EGR vacuum line. 3. Install the EGR to exhaust manifold tube. For ad ...Other materials:
Connecting Rod - Bushing Diameter
1. Measure the inner diameter of the connecting rod bushing, if equipped.
Verify the diameter is
within specification.
Refer to the appropriate section in Group for the procedure.
If out of specification, install new components as necessary. Refer
...
Installation
CAUTION: Electronic modules are sensitive to static electrical
charges. If exposed to
these charges, damage may result.
1. NOTE: Two technicians are necessary to carry out this step.
Install the instrument panel.
2. Install the upper instrument pa ...
Transmission (Removal)
1. Remove the gearshift lever knob.
2. Remove the console panel gearshift plate. Disconnect the cigar lighter
electrical connector, then
lift the gearshift lever boot over the gearshift lever.
3. Remove the bolts and the upper gearshift lever.
4. Remove ...