Ford Mustang (2005-2014) Owners Manual: Manual seats

WARNING: Do not adjust the driver’s seat or seatback while the vehicle is moving.

WARNING: Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged.

Moving the seats backward and forward

Recline adjustment

WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips.

Adjusting the height of the driver’s seat

    Head restraints
    WARNING: To minimize the risk of neck injury in the event of a crash, the driver and passenger occupants should not sit in or operate the vehicle, until the head restraint is placed in its proper posi ...

    Power seats
    WARNING: Never adjust the driver’s seat or seat back when the vehicle is moving. WARNING: Before returning the seat back to its original position, make sure that cargo or any objects are not trapped ...

    Other materials:

    Push Rods - Inspection
    1. CAUTION: Do not attempt to straighten push rods. Check the ends of the push rods for nicks, grooves, roughness or excessive wear. Install new push rods as necessary. Refer to the appropriate section in Group 303 for the procedure. The push rods ca ...

    Piston - Ring End Gap
    CAUTION: Use care when fitting piston rings to avoid possible damage to the piston ring or the cylinder bore. CAUTION: Piston rings should not be transferred from one piston to another. NOTE: Cylinder bore must be within specification for taper and out-of ...

    Assembly
    1. CAUTION: 118 ml (4 oz) of the specified Ford Friction Modifier must be used in the axle. Lubricate each steel clutch plate and soak all friction plates for no less than 15 minutes. Use Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford ...