Ford Mustang (2005-2014) Owners Manual: Seats

Cabin air filter
Note: Make sure you have a cabin air filter installed at all times. This prevents foreign objects from entering the system. Running the system without a filter in place could result in degradation or ...

Sitting in the correct position
WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting in serio ...

Other materials:

System Bleeding
1. If required, remove the hydraulic system from the vehicle. Refer to Hydraulic System, Lift Cylinder and Motor in this section. 2. Remove the fill plug at the end of the hydraulic pump. 3. Fill the pump with Mercon Multi-Purpose Automatic Transmiss ...

Temperature and Manifold Absolute Pressure (T-MAP) Sensor - Cobra
Removal and Installation 1. Disconnect the temperature manifold absolute pressure (T-MAP) sensor electrical connector. 2. Remove the bolts and the T-MAP sensor. 3. To install, reverse the removal procedure. ...

Installation
All vehicles 1. NOTE: If the valve cover is not secured within four minutes, the sealant must be removed and the sealing area cleaned with metal surface cleaner. Allow to dry until there is no sign of wetness, or four minutes, whichever is longer. Failure to ...