Ford Mustang (1999-2004) Service Manual: Intermediate One-Way Clutch
Intermediate Clutch Cylinder Disassembled View
Disassembly
1. NOTE: One tab that locks the reverse clutch drum into the reverse sun shell may be removed.
This is done for balancing purposes.
Remove the intermediate one-way clutch.
1. Remove the snap ring.
2. Remove the intermediate one-way clutch.
Assembly
1. NOTE: The intermediate one-way clutch must rotate counterclockwise when installed on the reverse clutch drum and will make a ratchet sound.
Install the intermediate one-way clutch.
1. Install the intermediate one-way clutch.
2. Install the snap ring.
Assembly
1. Using the special tool, install the front pump seal assembly. 2. Install the clutch piston seals. 1. Install the intermediate clutch piston outer seal. 2. Install the intermediate clutch pist ...Reverse Clutch
Special Tool(s) Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) Compressor, Clutch Spring 307-015 (T65L-77515-A) Protector, Transmission Reve ...Other materials:
Removal
1. Drain the engine cooling system.
2. Remove the air cleaner outlet tube.
3. Disconnect the fuel line.
4. Disconnect the upper radiator hose from the water outlet connector.
5. Disconnect and remove the upper radiator hose.
6. Disconnect the acce ...
Differential Case and Ring Gear - Traction-Lok
Special Tool(s)
2-Jaw Puller
205-D072 (D97L-4221-A) or
equivalent
Gauge, Differential Clutch
205-022 (T66L-4204-A)
Gauge, Differential Clutch
205-135 (T80P-4946-A)
Installer, Differential Side
Bearing
205-010 (T57 ...
Evaporative Emission Canister
Removal and Installation
1. WARNING: The evaporative emission system contains fuel vapor
and condensed
fuel vapor. Although not in large quantities, it still presents the
danger of explosion or
fire. Disconnect the battery ground cable from the bat ...