Ford Mustang (1999-2004) Service Manual: Electrical Distribution
Module - Daytime Running Lamps (DRL)
Removal
1. CAUTION: Electronic modules are sensitive to static electrical
charges. If exposed
to these charges, damage can result.
Disconnect the battery ground cable.
2. Remove the daytime runn ...
Module Communications Network
General Specifications
Communications Network
Module Communications Network
...
Other materials:
Engine Cooling (Description and Operation)
CAUTION: Vehicle cooling systems are filled with Motorcraft Premium
Gold Engine
Coolant VC-7-A (in Oregon VC-7-B) or equivalent meeting Ford specification
WSS-M97B51-A1
(yellow color). Always fill the cooling system with the same coolant that is
present in ...
Installation
1. NOTE: LH shown; RH similar.
Install the camshafts.
Lubricate the camshafts with clean engine oil.
2. Install the camshaft bearing cap assemblies and tighten the bolts in the
sequence shown.
3. Install the bolts.
4. CAUTION: Timing marks must be a ...
System Bleeding
1. If required, remove the hydraulic system from the vehicle. Refer
to Hydraulic System, Lift
Cylinder and Motor in this section.
2. Remove the fill plug at the end of the hydraulic pump.
3. Fill the pump with Mercon Multi-Purpose Automatic Transmiss ...