Ford Mustang (1999-2004) Service Manual: Air Distribution and Filtering

Torque Specifications

Torque Specifications

Vacuum Hose Repair - Mini-Tube
Special Tool(s) Vacuum Pump Kit 416-D002 (D95L-7559-A) or equivalent 1. Measure the length of the damaged area of the mini-tube vacuum hose. 2. Cut a piece of standard 1/8 inch inne ...

Air Distribution
NOTE: The air distribution system of this vehicle cannot be equipped with a cabin air filter. There are two sources of air available to the air distribution system: outside air recirculated air ...

Other materials:

Evaporator Core Orifice
NOTE: The evaporator core orifice is an integral part of the condenser to evaporator line and should be installed as an assembly with the line. NOTE: A new evaporator core orifice should be installed whenever a new A/C compressor is installed. The evapora ...

Water Pump
Removal and Installation 1. Disconnect the battery ground cable. 2. Drain the coolant. For additional information, refer to Supercharger Cooling System Draining, Filling and Bleeding in this section. 3. Remove the retainer and position the inner fender well ...

Removal
1. Raise and support the vehicle. 2. Remove the rear wheel and tire assemblies. 3. CAUTION: Remove the rear brake calipers to prevent drag during the drive pinion bearing preload adjustment. CAUTION: Do not allow the calipers to hang from the brake hoses ...