Ford Mustang (1999-2004) Service Manual: Front Disc Brake
General Specifications
Torque Specifications
- Front Disc Brake (Description and Operation)
- Pads
- Brake Pads - Cobra
- Caliper
- Brake Caliper - Cobra
- Brake Caliper Anchor Plate - Cobra
- Brake Caliper Anchor Plate
- Disc
- Shield
- Caliper (DISASSEMBLY AND ASSEMBLY)
Runout Check - Brake Disc and Hub
Special Tool(s)
Brake Measurement Kit
134-R0199 or equivalent
Material
Item
Specification
High Temperature Nickel Anti-
Seize Lubricant
F6AZ-9L494-AA
ESE-M12A4-
A
...
Front Disc Brake (Description and Operation)
Front Disc Brake Components
Disc Brake Caliper Components
The front disc brake caliper (2B120):
bolts to the front disc brake caliper anchor plate (2B292),
which bolts to ...
Other materials:
Disassembly
1. Remove the driveshaft (4602). For additional information, refer to
Driveshaft in this section.
2. CAUTION: Under no circumstances is the driveshaft assembly to be
clamped in the
jaws of a vise or similar holding fixture. Denting or localizing fracture ca ...
Installation
1. Install the spring.
1. Position the spring and spring insulator in the front suspension lower
control arm.
2. Swing the arm into the fender well.
2. Position a jack stand under the front suspension lower control arm inboard
of the spring seat
and r ...
Analysis of Vibration
WARNING: A vehicle equipped with a Traction-Lok differential will
always have both
wheels driving. If only one wheel is raised off the floor and the rear axle is
driven by the engine,
the wheel on the floor could drive the vehicle off the stand or jack. Be s ...
