Ford Mustang (1999-2004) Service Manual: Electronic Feature Group
- Anti-Theft - PATS
- Anti-Theft - Passive Anti-Theft System (PATS) (Description and Operation)
- Anti-Theft - Passive Anti-Theft System (PATS) (Diagnosis and Testing)
- Key Programming - Erase All Key Codes and Program Two Keys
- Key Programming - Program a Key Using Two Programmed Keys
- Key Programming - Enable/Disable Spare Key Programming
- Key Programming - Additional Key With One Programmed Key
- Security Access - Procedure
- Module - Passive Anti-Theft Transceiver
- Multifunction Electronic Control Modules
Module Configuration
Module Configuration (Diagnosis and Testing)
Special Tool(s)
Worldwide Diagnostic System
(WDS)
418-F224
New Generation STAR (NGS)
Tester
418-F052 or equivalent
diagnostic tool ...
Anti-Theft - PATS
Torque Specifications
...
Other materials:
Locking and unlocking
You can use the power door lock control or the remote control to lock
and unlock your vehicle.
Power Door Locks
The power door lock control is located on the driver and front passenger
door panels.
A. Unlock
B. Lock
Remote Control
You can use the remote cont ...
Removal
1. Remove the roller followers. For additional information, refer to Roller
Followers in this section.
2. Remove the LH timing chain for the LH side and both timing chains for the RH
side. For
additional information, refer to Timing Drive Components in this ...
Component Tests
Ball Joint Inspection
1. Raise and support the vehicle.
2. Prior to performing any inspection of the ball joints, inspect the wheel
bearings.
3. Position a safety stand beneath the front suspension lower arm (3079) to be
tested.
4. While an assistant pul ...
