Ford Mustang (1999-2004) Service Manual: Manual Transaxle/Transmission - TR3650
General Specifications
Torque Specifications
- Manual Transmission
- Bearings - Inspection
- Seal
- Output Shaft Speed (OSS) Sensor
- Transmission (Removal)
- Transmission (Disassembly)
- Input Shaft and Bearing
- Output Shaft
- Countershaft Bearing
- Synchronizers
- Gearshift Rail Bushing
- Gearshift Rail and Fork
- Transmission (Assembly)
Transmission (Assembly)
Special Tool(s) Dial Indicator with Bracketry 100-002 (TOOL-4201-C) or Equivalent Gauge, Clutch Housing 308-021 (T75L-4201-A) Extension Housing Seal Replacer ...Manual Transmission
The TR3650 five-speed manual transmission features the following: The fifth speed gear functions as an overdrive gear. The forward gears are synchronized and helical cut. The reverse gear oper ...Other materials:
Crankshaft End Play
Special Tool(s)
Dial Indicator Gauge with
Holding Fixture
100-002 (TOOL-4201-C) or
equivalent
1. Measure the crankshaft end play. Use a Dial Indicator Gauge with Holding
Fixture to measure
crankshaft end play.
2. Position the crankshaft t ...
Installation
All vehicles
1. Using the special tools, install the crankshaft rear oil seal.
Lubricate the oil seal using clean engine oil.
2. Using the special tool, install the crankshaft oil slinger.
Manual transmission vehicles
3. Install the flywheel. For additi ...
Pinpoint Test E: LFC 15/DTC B1916 - Driver Air Bag Circuit Shorted to
Battery or Ignition
Normal Operation
The restraints control module (RCM) checks for driver air bag circuit
shorts to battery or ignition by
monitoring the voltage of circuit 614 (GY/OG) and 615 (GY/WH) at pins 3 and
4. If the RCM detects a
short to battery or ignition on e ...