Ford Mustang (1993-2004) Service Manual: Gearshift Lever and Boot TR3650

Manual Transmission

The TR3650 five-speed manual transmission features the following:

  • The fifth speed gear functions as an overdrive gear.
  • The forward gears are synchronized and helical cut.
  • The reverse gear operates through a constant-mesh, fully synchronized system.
  • The shift interlock system prevents the engagement of more than one gear.
  • The countershaft is serviced as an assembly.
  • An aluminum main case, extension housing and bell housing.

Transmission Internal Components - Disassembled View

 

 

 

 

 

Transmission Case and Shift Components - Disassembled View

 

Transmission Case and Shift Components - Disassembled View

 

 

 

 

Transmission Identification

 

Transmission Identification

The transmission identification tag is located under the lower bolt that retains the extension housing to the main case.

The five speed overdrive (TR3650) transmission is available for the Mustang 4.6L (2V).

Transmission Identification

 

 

 

Bearings - Inspection

 

    Seal TR3650
    Manual Transmission The TR3650 five-speed manual transmission features the following: The fifth speed gear functions as an overdrive gear. The forward gears are synchronized and helical c ...

    Output Shaft Speed (OSS) Sensor TR3650
    Manual Transmission The TR3650 five-speed manual transmission features the following: The fifth speed gear functions as an overdrive gear. The forward gears are synchronized and helical c ...

    Other materials:

    Accelerator Pedal and Shaft
    Acceleration Control (Description and Operation) Component Locations   The throttle is controlled by the accelerator cable which is connected to the accelerator pedal and shaft. The accelerator pedal and shaft should travel smoothly from the idle t ...

    Parking Brake (Description and Operation)
    Parking Brake (Description and Operation)   The parking brake system is cable-actuated and controlled by an independent hand-operated parking brake control (2780). To apply parking brake, pull parking brake control upward as far as possible. The par ...

    Pinpoint Test N: DTC B1869 - Air Bag Indicator Inoperative
    Pinpoint Test A: The Air Bag Warning Indicator Is Illuminated Continuously - RCM Disconnected, Inoperative or Lost/Low Ignition Feed Normal Operation NOTE: During normal operation the air bag indicator will be lit continuously for 6 seconds after the ignitio ...