Ford Mustang Service Manual: Transmission (Installation)

Manual Transmission

The TR3650 five-speed manual transmission features the following:

  • The fifth speed gear functions as an overdrive gear.
  • The forward gears are synchronized and helical cut.
  • The reverse gear operates through a constant-mesh, fully synchronized system.
  • The shift interlock system prevents the engagement of more than one gear.
  • The countershaft is serviced as an assembly.
  • An aluminum main case, extension housing and bell housing.

Transmission Internal Components - Disassembled View

 


 



Transmission Case and Shift Components - Disassembled View


Transmission Case and Shift Components - Disassembled View

 


 


Transmission Identification


Transmission Identification

The transmission identification tag is located under the lower bolt that retains the extension housing to the main case.

The five speed overdrive (TR3650) transmission is available for the Mustang 4.6L (2V).

Transmission Identification

 


 

Bearings - Inspection


    Transmission (Assembly)
    Manual Transmission The TR3650 five-speed manual transmission features the following: The fifth speed gear functions as an overdrive gear. The forward gears are synchronized and helical cut. ...

    Manual Transaxle/Transmission - T56
    General Specifications Torque Specifications ...

    Other materials:

    Symptom Charts
    Road Test NOTE: It may be necessary to have the customer ride along or drive the vehicle to point out the concern. During the road test, take into consideration the customer's driving habits and the driving conditions. The customer's concern just may be an a ...

    Assembly
    Disassembly 1. NOTE: The index mark on the output shaft must be aligned with the index mark on the output shaft ring gear during the assembly procedure. Remove the ring gear snap ring. 2. Separate the ring gear and output shaft. 3. Remove the three output ...

    Axle Housing
    Rear Drive Axle and Differential   The axle housing assembly consists of a cast center section with two steel tube assemblies and a stamped differential housing cover (4033). The differential housing cover uses silicone sealant as a gasket. ...